filename: tfr 622a.doc version 1.3 30.03.2007 vi telefilter saw resonator specification tfr 622a 1/5 tele filter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.co m measurement condition ambient temperature: 25 c input pow er level: 0 dbm terminating impedance: input: 50 ? || 0 pf output: 50 ? || 0 pf ch aracteristics remark: the minimum of the attenuation a min is defined as the insertion loss a e . the centre frequency f r is the measured frequency at the minimum insertion loss point. the frequency shift of the filter in the operating temperature range is not included in the production tolerance scheme. d a t a ty p. v a lue tolerance / limit insertion loss a e = a min 1 , 5 d b m a x . 3 d b (reference level) centre frequency f r 6 2 2 , 3 3 8 0,075 m h z quality factor unloaded q 7 7 0 0 m i n . 7000 parallel capacitance c 0 * 2 , 1 6 p f - motional resistance r m * 2 1 ? - motional inductance l m * 4 7 , 7 h - motional capacitance c m * 1 , 3 7 f f - operating temperature range otr - -30 c ... + 85c storage temperature range - -40 c ... + 90c turnov er temperature t 0 32 c - temperature coefficient of frequency t c f ** -0,044 ppm/k 2 - *) the equiv a lent circuit model is for reference only . **) ? f c (hz) = tc f (ppm/k) x (t - t a ) x f cat (mhz) ge ne ra te d: ch ecked / a p p r o v ed : vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein w i thout notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation.
filename: tfr 622a.doc version 1.3 30.03.2007 vi telefilter saw resonator specification tfr 622a 2/5 tele filter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.co m f ilter ch aracteristic 621. 3 621. 8 622. 3 622. 8 623 . 3 -1 6 -1 4 -1 2 -1 0 -8 -6 -4 -2 0 f r eq u e n cy i n m h z m a g n it u d e in d b 621. 3 62 1. 8 622. 3 622. 8 623. 3 0 0. 00 6 0. 01 2 0. 01 8 0. 02 4 0. 0 3 0. 03 6 0. 04 2 0. 04 8 0. 05 4 0. 0 6 f r e que nc y c o nd uc t a n c e i n s cons truc tion a nd pin c onne c t ion (all dimensions in mm) 1 2 3 4 5 6 1, 2 m a x . 0,6 0,7 5 3, 0 + / - 0 , 1 5 0,6 0, 3 0 x0,3 0 13 6 4 d a te c o d e date code: y ear + w eek v 2007 w 2008 x 2009 ... 1 ground 2 input 3 ground 4 ground 5 input rf return* / output** 6 ground * for oneport operation ** for tw oport operation 622a r v14 50 ? te s t c i rc uit a nd e quiv e le nt c i rc uit 2 6 2 6 cm c0 lm rm 5 5 vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein w i thout notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation.
filename: tfr 622a.doc version 1.3 30.03.2007 vi telefilter saw resonator specification tfr 622a 3/5 tele filter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.co m stability characteristics, reliability after the follow i ng tests the filter shall meet the w hole specification: 1. shock: 500g, 1 ms, half sine w a ve, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,35 mm or g respecti vely , 1 octave per min, 10 cy cles per plan, 3 plans; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 30 min. each / 10 cy cles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow ): reflow possible: three times max.; for temperature conditions refer to the attac hed "air reflow temperature conditions" on page 4; this filter is rohs compliant (2002/95/eg, 2005/618/eg) packin g tape & reel: iec 286 ? 3, w i th exeption of value for n and minimum bending radius; tape ty pe ii, embossed carrier tape w i th top cover tape on the upper side; max. pieces of filters peer reel: 9000 reel of empty components at start: min. 300 mm reel of empty components at start including leader: min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao p u ll o f f d i r e c t io n pin m a rk er ty p da te c o d e ko t tape (al l di mensi ons i n mm) w : 8,00 0,3 po : 4,00 0,1 do : 1,50 +0,1/-0 e : 1,75 0,1 f : 3,50 0,05 g(min) : 0,75 p2 : 2,00 0,05 p1 : 4,00 0,1 d1(min) : 1,50 a o : 3,25 0,1 bo : 3,25 0,1 ct : 5,5 0,1 a c n w 1 w 2 r eel (all d i men s io n s in mm) a : 330 w 1 : 8,4 + 1 ,5/-0 w 2 (max ) : 14,4 n(min) : 50 c : 13,0 +0,5/-0,2 the minimum bending radius is 45 mm. vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein w i thout notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation.
filename: tfr 622a.doc version 1.3 30.03.2007 vi telefilter saw resonator specification tfr 622a 4/5 tele filter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.co m a i r re flow te mpe r a t ure c onditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/second > 100c betw een 300 and 600 seconds > 150c betw een 240 and 500 seconds > 217c betw een 30 and 150 seconds peak temperature max. 260c time w i thin 5c of actual peak temperature betw een 10 and 30 seconds cool-dow n rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds chip-mount air reflow profile temperature / c max. 260c 217c time / s max. 300 s 10 ... 30 s 30 ... 150 s vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein w i thout notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation.
filename: tfr 622a.doc version 1.3 30.03.2007 vi telefilter saw resonator specification tfr 622a 5/5 tele filter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.co m history ve rs ion re a s on of c h a nge s na me da te 1.0 - generate development specification dr. wall 07.12.2004 1.1 - add ty pical values, change turnover temperat ure, reduce quality factor limit martens 24.08.2005 1.2 - change frequency from 622,08 mhz to 622,301 mhz dr. wall 10.07.2006 1.3 - adjust ty pical values dr. wall 30.03.2007 - add resonator characteristic - correct centre frequency to 622,338 mhz - add rohs information - define pinning more precisely vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein w i thout notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation.
|
